Sulphonated Melamine Formaldehyde Superplasticizer SM-F10
SM-F10 is a kind of powder form superplasticizer based on sulfonated melamine formaldehyde resin,which is suitable for cementitious mortars with requirements of high fluidity and high strength.
|Sulphonated Melamine Superplasticizer SM-F10
|Dry loss after 30min.@ 105℃
|pH value of 20% solution @20℃
|SO₄²- ion content
|CI- ion content
|Air content of concrete test
|Water reducing ratio in concrete test
➢ Flowable mortar or slurry for grouting application
➢ Flowable mortar for spreading application
➢ Flowable mortar for brushing application
➢ Flowable mortar for pumping application
➢ Steam curing concrete
➢ Other dry mix mortar or concrete
➢ SM-F10 can impart mortar quick plasticizing speed, high liquifying effect, low air entraining effect.
➢ SM-F10 is of good compatibility with various kind of cement or gypsum binders, other additives such as de-foaming agent, thickener, retarder, expansive agent, accelerator etc.
➢ SM-F10 is suitable for tile grout, self-leveling compounds, fair-faced concrete as well as colored floor hardener.
➢ SM-F10 can be used as wetting agent for dry mix mortar to obtain good workability.
☑ Storage and delivery
It should be stored and delivered under dry and clean conditions in its original package form and away from heat.After the package is opened for production,tight re-sealing must be taken to avoid ingress of moisture.
☑ Shelf life
Stay in cool, dry conditions for 10 months. For material storage over shelf life, quality confirmation test should be done before use.
☑ Product safety
ADHES ® SM-F10 does not belong to hazardous material.Further information on safety aspects is given in Material Safety Data Sheet.